Skip to content
QUICK CHANGE TOOL POST
Sizes-60x60x38, 75x75x50,100x100x75 MM
Desc. - Tool changing time could be saved through Quick Change Tool Post on Lathe. It can accommodate, turning, vee groove & parting tool the same time.
AUTOMATIC BORING CUM I FACING HEAD
Sizes-Head Dia 68 MM, Boring Cap 250 MM
Desc. - It very rigid in construction, with very little back lash in the tool carrier due to extra large slide ways. It has the Boring Cap of 250 mm & takes 12 mm boring tool sizes.
CAST IRON SURFACE PLATE
[for Drill Machines]
Sizes -1/8" - 1/4", 1/8"-1/2", 3/8"-3/4"
Desc. - Most suitable for tapping operation with drill machines. The automatic reverse mechanism has a double backout speed & an adjust, friction clutch to avoid tap breakage.
STUB MILLING ARBOR
Holding Cutter Dia - 1" Shanks - MT2, MT3 & R8
END MILL HOLDER
Holding Dia - 25, 32, 38, 44, 50
Shank Dia - MT2, MT3 & R8
SOLID SOCKETS
Holding Dia - 25, 32, 38, 44, 50
Shank Dia - 1,2, 3, 4
SLOTTING ATTACHMENT
[for Milling Attachment]
Desc. - This is used on the upper side of the milling machine to generate keys & slots. It has the capacity to generate the slot from 2" to 5"
RACK CUTTING ATTACHMENT
[for Milling Attachment]
Desc. - It is fitted on the upper side of the milling for any type of worm cutting, rack cutting with it. It's work range is l°to45°
HOBBING ATTACHMENT
[for Milling Attachment]
Desc. - It is used for hobbing purposes on the milling machine. It's sizes ranges from 4 V4" to 8 Vi"