Drilling Cum Tapping Machine
ECONOMICAL SERIES / DRILLING + TAPPING / GENERAL WORKSHOP PURPOSES
Drilling Cum Tapping Machine was built keeping in mind the requirement from small workshops for a cost-effective machine with combined operation of drilling & tapping on the same machine with ease and more importantly without spending extra.
Product Specifications
| MODEL | DT-25B | T-40B | |
|---|---|---|---|
| Drilling Capacity (MS) | 25 | 40 | |
| Drilling Capacity (CI) | 30 | 45 | |
| Tapping Capacity | 25 | 25 | |
| Column Diameter | 100 | 110 | |
| Spindle Travel | 150 | 254 | |
| Max. Dist. Spindle to Base | 700 | 1025 | |
| Centre of Spindle to Column | 200 | 254 | |
| Taper Spindle | MT 3 | MT 4 | |
| Table Size | 400 x 300 | 480 x 480 | |
| Machine Base Size | 600 x 400 | 635 x 435 | |
| Spindle Speeds (No. & Range) | 8 (100-2600) | 8 (90-2200) | |
| Elec. Motor | 1 HP | 2 HP | |
| V-Belt Section | B-46 | B-52 | |
| Approx. Machine Weight (Kgs) | 200 | 300 | |
Note: * All dimensions are in MM, unless specified. Higher Sizes shall be provided on request
Standard Accessories
- Elec. Motor
- Elec. Control Pendent
- Machine Light
- Drill Chuck & Arbor
- Instruction & Maintenance Manual
Optional Accessories
- Coolant Pump
- Drill Vice
- Milling Vice
- Tapping System
- Milling Cutters
- Drill Bits
- Lubrication Pump
Video Gallery
Image Gallery
Drilling Operation
